Jabsco 3" Flangemount Blower - 105 CFM - 12V [35115-0020] Electrical | Fuse Blocks & Fuses ST60 Long Arm Masthead Transducer

ST60 Long Arm Masthead Transducer

Passive system - no power required

6" Stiff Brush

Shipping Weight: 1lb 8oz (680g)

Termination resistors are used to terminate both ends of the trunk line

Jabsco 3" Flangemount Blower - 105 CFM - 12V [35115-0020] Electrical | Fuse Blocks & Fuses ST60 Long Arm Masthead TransducerDC 105 CFM Flangemount 3" Blowers Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.