3M 3-Hole 1 Inch Spreader Nozzle - 9917 Color|Dark Green Remove the heat shield assembly

Remove the heat shield assembly by removing the two Phillips head screws from either side of the heat shield and the one Phillips head screw on the heat shield immediately above the loading chamber

com are ready to help with every aspect of your application

This type of adhesive is the industry standard in golf club weighting because it will not get brittle and become detached inside the clubhead

Applications for Tecbond 7718

the AP100 can handle the highest volume dispensing applications

3M 3-Hole 1 Inch Spreader Nozzle - 9917 Color|Dark Green Remove the heat shield assembly3M 9917 3 Hole Spreader Nozzle Overview The 3M 9917 is a nozzle that can be attached to the 3M Polygun PG II and PG II LT hot melt glue guns. Once applied, the 9917 will extrude three separate hot melt beads, a total of 1 inch in diameter. Using this nozzle is excellent when a larger surface area needs to be covered or additional bond strength is needed. Works With PG II Pneumatic Hot Melt Applicator PG II LT Pneumatic Hot Melt Applicator