1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns The embedded anchors of the

The embedded anchors of the DETAL are preattached to the moisture barrier through slots that allow some adjustment during installation to avoid rebar

162" x 2 1/2" nails into the header and 0

A wide array of value-engineered hole patterns are available that will accommodate different load levels while minimizing installed cost

and other exposed wood structures where moisture and weather resistance are critical

the GT Tie delivers both strength and symmetry

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns The embedded anchors of theWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".