Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts Marking on the relay: G3R-0DX02SN

Marking on the relay: G3R-0DX02SN

You can also use the standard sensor connector to connect to the front panel of the Wintriss DSI 2

Significantly lower cost than comparable devices

fast-moving

Mechanical Relay - Recommended for speeds up to 200 spm

Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts Marking on the relay: G3R-0DX02SNWintriss offers this 3mm diameter shielded proximity sensor as a useful sensor for detecting small features, especially when space inside the die is at a premium. This sensor has an unthreaded housing and should be epoxied into a slip fit hole. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bush or insert. This inductive proximity sensor is Normally Closed; it actuates (turns On) when metal leaves the sensing