End of Material Sensor (Electro-mechanical) Sensors Control output Load power supply

Control output Load power supply voltage: 26

Functions OFF-delay timer 0 to 40 ms (1 to 20 ms: 1-ms increments

Residual voltage 1 V max

Indicators Operation indicator (Orange LED) Protection circuits Output reverse polarity protection

When used with Wintriss die protection controllers

End of Material Sensor (Electro-mechanical) Sensors Control output Load power supplyThe End of Material sensor is designed for metal stamping applications. It detects material run out, and prevents pulling of the coil end through the feeder or straightener. It also keeps the press from running without coil stock. The sensor is typically installed so that the arm rides on the material. When the material runs out, the arm drops onto the insulated pin below it, generating a ground signal that is detected by the die protection