Johnny Joint Rod End 2 1/2 Inch Weld-On 2.812 Inch X 0.750 Inch Ball Externally Greased Each RockJock 4x4 Air & Fuel - Fuel Delivery - Flex Fuel Sensor Pinion Gear Splines: GM 10

Pinion Gear Splines: GM 10

or performance use

Naturally Aspirated HP at 43PSI: 800

Like all Pypes products

providing adjustment as-is and extra thread allowing you to cut them shorter as deemed necessary by the application

Johnny Joint Rod End 2 1/2 Inch Weld-On 2.812 Inch X 0.750 Inch Ball Externally Greased Each RockJock 4x4 Air & Fuel - Fuel Delivery - Flex Fuel Sensor Pinion Gear Splines: GM 10RockJock's weld on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty,